A

Adams, Andrew R.

• Seismic Evaluation - Walls: Comparison of In-plane Lateral Load Resistance of Interior Steel Stud and Wood Stud Light-Frame Walls
  (View Abstract)

Adams, Beverley J.

• Remote Sensing for Condition Assessment and Damage Identification: Remote Sensing and Field Reconnaissance for Rapid Damage Detection in Hurricane Katrina
  (View Abstract)
• Wind or Water? (Separating Wind and Storm-Surge Damage in Hurricanes): Use of Emerging Remote-Sensing Technologies to Determine Neighborhood Wind/Water Damage Patterns
  (View Abstract)

Adan, Scott M.

• Connections and Detailing - 2: Inelastic Cyclic Testing of the Kaiser Bolted Bracket Moment Connection
  (View Abstract)

Agarwal, Anil

• Fire Behavior and Design of Steel and Composite Structures: BEHAVIOR OF STEEL BUILDING STRUCTURES UNDER REALISTIC FIRE LOADING
  (View Abstract)
• Design for Structural Fire Safety: Modeling the Behavior of Structural Columns under Fire Loading Effects
  (View Abstract)

Agarwal, Puneet

• Risk, Reliability, and Safety in the Offshore Environment: Reliability Analysis and Design Procedures for Offshore Wind Turbines
  (View Abstract)

Aghmashei, GholamHosein

• Poster Session I: The Effect of Soil-Structure Interaction in 14-story Building Retrofitting Project of National Housing and Land Organization
  (View Abstract)

Agrawal, Anil

• Utilization of Non Destructive Testing (NDT) Methods in Structural Health Monitoring (SHM): Deterioration Rates for Bridge Components in New York
  (View Abstract)
• Remote Sensing for Condition Assessment and Damage Identification: Remote Monitoring on Internal Condition of Buried Pipe Infrastructures
  (View Abstract)

Ahmad, Jameel

• Poster Session I: A Novel Structure to Protect Against Explosive Loads
  (View Abstract | View Presentation)

Ahmadizadeh, Mehdi

• Validation and Verification of Hybrid Simulation for Seismic Structural Response: Assessment of Numerical and Experimental Errors in Hybrid Simulation
  (View Abstract)

Ahsan, Kareem

• Damping in Buildings: Measurements, Uncertainty, and Application: Uncertainty in Damping and Damping Estimates: An Assessment of Databases and Data from Recent Full-Scale Measurements
  (View Abstract)

Akira, Kawaguchi

• Remote Sensing for Condition Assessment and Damage Identification: Remote Monitoring on Internal Condition of Buried Pipe Infrastructures
  (View Abstract)

Aktan, A. Emin

• Structural Identification of Constructed Systems for Evaluation of Performance: An Integrated Approach by the ASCE Committee
  (View Abstract)

Al-Sayegh, Ammar

• Advances in Software Development for Structural Engineering Applications: A New Parallel Structural Analysis Framework
  (View Abstract)

Alampalli, Sreenivas

• Utilization of Non Destructive Testing (NDT) Methods in Structural Health Monitoring (SHM): Suitability of Non Destructive Testing (NDT) Methods for Structural Health Monitoring (SHM) of Civil Infrastructures
  (View Abstract)
• Remote Sensing for Condition Assessment and Damage Identification: Review of Remote Sensing for Condition Assessment and Damage Identification after Extreme Loading Conditions
  (View Abstract)

Alavi, Babak

• Large Structures: PERFORMANCE-BASED SEISMIC DESIGN OF AN INDUSTRIAL STORAGE RACK SYSTEM
  (View Abstract)

Allen, Don

• Sustainability for Structural Engineers: Material Industry Perspectives: The Structural Engineer's Role in Selecting Sustainable Materials: The Steel Industry's Perspective
  (View Abstract)

Alsamsam, Iyad M.

• Sustainability for Structural Engineers: Material Industry Perspectives: Sustainable High Performance Concrete Buildings
  (View Abstract | View Presentation)

Aly Sayed Ahmed, Aly M.

• Poster Session I: Active Control in a High-Rise Building under Multidirectional Wind Loads
  (View Abstract | View Presentation)

Aminmansour, Abbas

• High Rise Buildings - Session 2: Integrated Design and Construction of Tall Building
  (View Abstract | View Presentation)

Amoroso, Samuel D.

• Lessons from Recent Windstorms: A Rational Benefit/Cost Approach for Evaluating Structural Mitigation for Wind Damage: Learning
  (View Abstract)
• Wind or Water? (Separating Wind and Storm-Surge Damage in Hurricanes): Effective Forensic Engineering Investigations of Hurricane
  (View Abstract)

Ando, Hirotaka

• Results of Recent E-Defense Tests on Full-Scale Steel Buildings: Experiments Utilizing Multipurpose Test-Bed
  (View Abstract)

Andrawes, Bassem

• Seismic Design of Bridges: Seismic Retrofit of Bridge Columns using Innovative Wrapping Technique
  (View Abstract)

Andrews, Blake M.

• General Seismic - Analysis: Ductility Capacity Models for Buckling-Restrained Braces using a Bayesian Methodology
  (View Abstract | View Presentation)

Apanasovich, Tatiyana V.

• Network Infrastructure Performance for Extreme Winds: Estimating Electric Power Outages due to Hurricane and Ice Storms Using Spatial Generalized Linear Mixed Models
  (View Abstract)

Araki, Yoshikazu

• Poster Session I: Vertical Vibration Isolation Device using Constant Load Supporting Mechanism
  (View Abstract)

Asai, Takehiko

• Poster Session I: Vertical Vibration Isolation Device using Constant Load Supporting Mechanism
  (View Abstract)

Asakawa, Takeshi

• Results of Recent E-Defense Tests on Full-Scale Steel Buildings: Experiments Utilizing Multipurpose Test-Bed
  (View Abstract)

ASTANEH-ASL, Abolhassan

• Steel Shear Wall Systems-Recent Experimental and Analytical Studies: Experimental and Analytical Studies of a Steel Plate Shear Wall System
  (View Abstract | View Presentation)
• Steel Shear Wall Systems-Recent Experimental and Analytical Studies: Lateral Stiffness of Steel Shear Wall Systems
  (View Abstract)

AYDOGMUS, Taner

• Large Structures: Large Constructions and Bridge Abutments: Solutions with Geosynthetic Reinforced Earth
  (View Abstract)

Aynsley, Richard M.

• Introduction to the new ASCE Technical Council on Wind Engineering: Background to the Environmental Wind Engineering Committee of TCWE
  (View Abstract | View Presentation)

Ayoub, Ashraf S.

• Poster Session I: Mixed Formulation for Seismic Analysis of Composite Frame Elements
  (View Abstract)

Aziz, EL-Sayed

• Computational Aspects in Distance Education: IT-Enhanced Laboratory Experience within a Mechanical Engineering Undergraduate Curriculum
  (View Abstract | View Presentation)

B

Bagchi, Ashutosh

• Design for Structural Fire Safety: Structural performance of stud walls under normal and post-earthquake fire exposure
  (View Abstract)

Bai, Jong-Wha

• General Seismic - Analysis: SEISMIC FRAGILITY ANALYSIS OF TYPICAL LOW- TO MID-RISE REINFORCED CONCRETE STRUCTURES
  (View Abstract | View Presentation)

Baker, William F.

• Pushing the Envelope in Material and Structural System Choice in High-Rise Buildings: Specifying High Performance Concrete for the Trump Tower Chicago
  (View Abstract)

Bakht, Bilal

• CSCE: The Confederation Bridge - The First 10 Years of Service: Wind Engineering for the Confederation Bridge
  (View Abstract)

Bank, Larry C.

• Timber Bridge Design Issues: Feasibility of rehabilitating timber bridges using mechanically fastened FRP strips
  (View Abstract)

Banks, David

• Design of Structures for Wind Using Computational Methods: Pulp CFD: Hollywood, the Elephant, and the Acronym
  (View Abstract)

Banks, James R.

• Seismic Design - Structural System: INTEGRAL BRIDGES – DEVELOPMENT OF A CONSTITUTIVE SOIL MODEL FOR SOIL STRUCTURE INTERACTION
  (View Abstract | View Presentation)

Bao, Yihai

• Application of Finite Element Analysis for Seismic Design and Evaluation of Concrete Buildings: Modeling of Damaged Shear Walls for Post-Event Collapse Analysis
  (View Abstract)

Baradaran Shoraka, Majid

• Validation and Verification of Hybrid Simulation for Seismic Structural Response: HYBRID SIMULATION OF THE GRAVITY LOAD COLLAPSE OF REINFORCED CONCRETE FRAMES
  (View Abstract)

Barker, Darrell D.

• Blast Resistant Buildings in Petrochemcial Facilities: Advanced Analysis Topics for Blast Resistant Buildings in Petrochemical Facilities
  (View Abstract)

Barker, Darrell

• Blast Resistant Buildings in Petrochemcial Facilities: Blast Response of Portable Buildings in Petrochemical Facilities
  (View Abstract)

Barr, Paul J.

• In-Service Monitoring of Bridges and High-Mast Light Towers: Utilization of Strong Motion Accelerometers for Real Time Monitoring of Structural Properties
  (View Abstract)

Barrett, J. David

• Poster Session I: Development of thick laminated wood plates using MPB wood
  (View Abstract)

Barrett-Gonzalez, Ron

• Fatigue Enhancement of Steel Structures: Fatigue Enhancement of Welded Coverplates Using Carbon-Fiber Composites
  (View Abstract)

Bartelt, Ted

• Bridge Case Studies: Structural Condition Assessment of the Herbert C. Bonner Bridge in Dare County, North Carolina
  (View Abstract | View Presentation)

Bartlett, F. Michael

• CSCE: The Confederation Bridge - The First 10 Years of Service: Wind Engineering for the Confederation Bridge
  (View Abstract)

Bartley, Tony C.

• Developments in Connection Design Specifications and Approaches: State-of-the-Art Analysis of Frames with Reduced Beam Section Connections
  (View Abstract)

Bartoletti, Stacy J.

• CASE Convocation Breakout Sessions: Ways to Make Your Life Easier and the World a Better Place: Scope, Contracts and Contract Document Tools
  (View Abstract)
• CASE Convocation Breakout Sessions: Ways to Make Your Life Easier and the World a Better Place: Scope, Contracts and Contract Document Tools
  (View Abstract)

Baylot, James T.

• Development and Validation of Advanced Modeling Methods for High-Rate Loadings: Dynamic Pull-out Test Simulations through the Lattice Discrete Particle Model (LDPM)
  (View Abstract | View Presentation)
• Impact Tests for Constitutive Models Analysis and Computation: Lattice Discrete Particle Model (LDPM) for Fracture Dynamics and Rate Effect in Concrete.
  (View Abstract | View Presentation)

Beck, James L.

• Structural Identification of Constructed Systems for Evaluation of Performance: System Identification on Actual Buildings: Challenges and Opportunities Across Hazards
  (View Abstract | View Presentation)

Becker, Duane D.

• New MBMA/AISC Methods for Design of Metal Building Frames: 3. Consideration of the Effects of Loading and Frame Configuration using the Direct Analysis Method
  (View Abstract | View Presentation)

Belis, Jan

• Poster Session II: Reinforced glass beams; Effect of increased temperatures on the glass-to-reinforcement adhesive bond
  (View Abstract)

Bell, Erin S.

• Train-Induced Vibrations in Buildings for Air-rights Developments: Long-Term Thermal Performance of a CFRP-Reinforced Bridge Deck
  (View Abstract | View Presentation)

Bennett, Caroline

• Fatigue Enhancement of Steel Structures: Fatigue Enhancement of Welded Coverplates Using Carbon-Fiber Composites
  (View Abstract)

Bentz, Audrey C.

• Damping in Buildings: Measurements, Uncertainty, and Application: Predictive Models for Damping in Buildings: The Role of Structural System Characteristics
  (View Abstract)

Bentz, Evan C.

• Recent Advances in Shear Design for Reinforced Concrete: One-Way Shear in Wide Concrete Beams with Narrow Supports
  (View Abstract)

Bergman, Don W.

• Cable Stayed Bridge Design: The Golden Ears Bridge in Vancouver, BC
  (View Abstract)

Berman, Jeffrey W.

• Poster Session III: Rotation and Strength Demands for Simple Connections to Develop Catenary Action
  (View Abstract)
• Bridge Design and Rehabilitation: Fatigue and Ultimate Capacity Comparison of Two Fiber Reinforced Polymer Bridge Decks
  (View Abstract)
• International Advances in Steel Plate Shear Walls 1: Research: Research Needs and Future Directions for Steel Plate Shear Walls
  (View Abstract)

Bhatti, Asghar

• Design of Structures for Wind Using Computational Methods: A Numerical Study of Wind Loads on Large Highway Sign Structures
  (View Abstract)

Bienkiewicz, Bogusz J.

• Lessons from Recent Windstorms: Lessons learned from structural damage investigations-a case study of 2003 Missouri-Kansas Tornadoes
  (View Abstract)

Billington, Sarah L.

• Application of Finite Element Analysis for Seismic Design and Evaluation of Concrete Buildings: Simulation of Self-Centering Fiber-Reinforced Concrete Columns
  (View Abstract)

Bilow, David N.

• Poster Session I: Fire and Concrete Structures
  (View Abstract)

Biondini, Fabio

• Structural Reliability in Design Practice: Use of Simulation in Structural Reliability
  (View Abstract)
• Structural Robustness and Redundancy: On Structural Robustness, Redundancy and Static Indeterminacy
  (View Abstract)

Bjorhovde, Reidar

• Development of AISI Cold-Formed Steel Seismic Design Standards: Overview of the Standard for Seismic Design of Cold-Formed Steel Structural Systems–Special Bolted Moment Frames
  (View Abstract)

Bland, Kenneth E.

• Sustainability for Structural Engineers: Material Industry Perspectives: Sustainability Attributes of Bio-Based Structural Building Products
  (View Abstract | View Presentation)

Bloodworth, Alan G.

• Seismic Design - Structural System: INTEGRAL BRIDGES – DEVELOPMENT OF A CONSTITUTIVE SOIL MODEL FOR SOIL STRUCTURE INTERACTION
  (View Abstract | View Presentation)

Bokan, Heinz

• Poster Session II: SOPHISTICATED NON-LINEAR 4D STRUCTURAL ANALYSIS FOR CABLE STAYED BRIDGES
  (View Abstract)

Bontempi, Franco

• Structural Robustness and Redundancy: NONLINEAR DYNAMIC ANALYSIS FOR THE STRUCTURAL ROBUSTNESS ASSESSMENT OF A COMPLEX STRUCTURAL SYSTEM
  (View Abstract | View Presentation)

Bonzon, Wade S.

• Cable Stayed Bridge Design: Unique Structural and Aesthetic Aspects of the Veterans' Glass City Skyway
  (View Abstract)

Booth, Peter N.

• Poster Session III: Behavior and Design of Steel-Plate Composite Walls
  (View Abstract | View Presentation)

Bos, Freek

• Poster Session II: Reinforced glass beams; Effect of increased temperatures on the glass-to-reinforcement adhesive bond
  (View Abstract)
• Assessment and Evaluation of Building Components: CABLE-STAYED FACADE STRUCTURE WITH WELDED BOROSILICATE GLASS TUBES
  (View Abstract)

Bounds, William L.

• Blast Resistant Buildings in Petrochemcial Facilities: General Update of the ASCE Report: Design of Blast Resistant Buildings in Petrochemical Facilities
  (View Abstract)

Bower, Owen J.

• High Rise Buildings - Session 2: Axial Restraint in Diagonally Reinforced Concrete Coupling Beams: An Analytical Investigation
  (View Abstract | View Presentation)

Bradshaw, Richard R.

• Structural Elegance: Structural Elegance
  (View Abstract)

Brakke, Bruce L.

• In-Service Monitoring of Bridges and High-Mast Light Towers: Field and Laboratory Studies on high-mast Lighting Towers in Iowa
  (View Abstract)

Braun, Kenton W.

• Poster Session I: Ice Forces on Inclined Bridge Piers
  (View Abstract | View Presentation)

Brett, Cory R.

• Train-Induced Vibrations in Buildings for Air-rights Developments: Predicting Train-Induced Vibrations in Multi-Story Buildings
  (View Abstract)

Brokaw, James T.

• Innovative Methods for Blast and Progressive Collapse Mitigation: Agent-Based Simulation of Human Movements During Emergency Evacuations of Facilities
  (View Abstract)

Brookes, Brianna

• In-Service Monitoring of Bridges and High-Mast Light Towers: Results of In-Service Monitoring of a Sample of Typical Highway Bridges
  (View Abstract | View Presentation)

Brooks, Robert T.

• Sustainability for Structural Engineers: Material Industry Perspectives: Sustainability Attributes of Bio-Based Structural Building Products
  (View Abstract | View Presentation)

Brosnan, Denis A.

• Building Façade: Water Penetration of Debris-Impacted Residential Wall Cladding Systems
  (View Abstract)

Brown, David L.

• Bridge Design and Rehabilitation: Fatigue and Ultimate Capacity Comparison of Two Fiber Reinforced Polymer Bridge Decks
  (View Abstract)

Brown, Steve

• IStructE: International Structural Engineering 2: Cutty Sark – the phoenix of the sea
  (View Abstract)

Brown, Thomas G.

• CSCE: The Confederation Bridge - The First 10 Years of Service: Confederation Bridge Ice Force Monitoring
  (View Abstract | View Presentation)

Brownjohn, James

• Structural Identification of Constructed Systems for Evaluation of Performance: A Review of Structural Identification for Bridge Structures
  (View Abstract)

Brownjohn, James M.

• Structural Identification of Constructed Systems for Evaluation of Performance: Structural Identification of Constructed Systems: Experimental Considerations
  (View Abstract)

Bruneau, Michel

• International Advances in Steel Plate Shear Walls 1: Research: Behavior and Design of Intermediate HBE in Steel Plate Shear Walls
  (View Abstract)
• International Advances in Steel Plate Shear Walls 1: Research: Research Needs and Future Directions for Steel Plate Shear Walls
  (View Abstract)

Buist, Larry

• Lessons from Recent Windstorms: Monitoring of Hurricane Wind Pressures and Wind Speeds on a Residential Home Roof With Wireless Instrumentation
  (View Abstract | View Presentation)

Bulleit, William M.

• Education of Structural Engineers - 1: Wood Education in Civil Engineering – The View from Lake Superior
  (View Abstract)
• The Next Step for ASCE 16: Performance-Based Design of Wood Structures: Performance-Based Design for Wood Residential Construction Subjected to Snow Loads
  (View Abstract | View Presentation)

Bundschuh, Gregg E.

• CASE Risk Management Spring Convocation Plenary Session 1: Building Information Modeling (BIM): The Promise and The Reality for A/E/C Firms
  (View Abstract)

Buonopane, Stephen G.

• Development and Validation of Advanced Modeling Methods for High-Rate Loadings: Effects of Random Properties on the Stability and System Reliability of Steel Frames
  (View Abstract)
• Sustainability for Structural Engineers: Strategies, Paradigms, and Measurement: The Basics of Life Cycle Assessment (LCA) for Structural Engineers
  (View Abstract)

Burgess, Christopher J.

• Cable Stayed Bridge Design: Innovative Features of Maine's First Cable Stay Bridge
  (View Abstract)

C

Callahan, Greg

• In-Service Monitoring of Bridges and High-Mast Light Towers: Field and Laboratory Studies on high-mast Lighting Towers in Iowa
  (View Abstract)

Callewaert, Dieter

• Poster Session II: Reinforced glass beams; Effect of increased temperatures on the glass-to-reinforcement adhesive bond
  (View Abstract)

Campbell, David M.

• Tensioned Fabric Structures - Case Studies: Snow Induced Ponding of Toyota Pavilion Canopy, Montage Mountain, PA
  (View Abstract)

Caple, Kacie D.

• Poster Session I: Preliminary Findings in the Development of Quantitative Tools for Assessing in situ Strength of Prestressed Concrete Structures Subjected to Fire
  (View Abstract | View Presentation)

Carrato, Peter J.

• Large Structures: Use of Chinese Steel for Heavy Industrial Projects
  (View Abstract | View Presentation)

Catbas, Necati

• Structural Identification of Constructed Systems for Evaluation of Performance: A Review of Structural Identification for Bridge Structures
  (View Abstract)
• Structural Identification of Constructed Systems for Evaluation of Performance: An Integrated Approach by the ASCE Committee
  (View Abstract)

Centeno, Jose

• CSCE: Seismic Performance and Retrofit of buildings - a Canadian Perspective: Seismic Performance Of Gravity Load Designed Reinforced Concrete Frames With Unreinforced Masonry Infill Walls
  (View Abstract | View Presentation)

Chadwell, Charles

• Seismic Design - Structural System: Evaluation of ASCE-41 Nonlinear Static Procedure Using Recorded Motions of Reinforced-Concrete Buildings
  (View Abstract)

Chadwell, Charles B.

• Seismic Evaluation - Walls: Experimental and Analytical Investigation of Seismic Performance of Sprayable Polyurethane Foam Infill Timber Shear Walls
  (View Abstract | View Presentation)

Chajes, Michael J.

• In-Service Monitoring of Bridges and High-Mast Light Towers: Results of In-Service Monitoring of a Sample of Typical Highway Bridges
  (View Abstract | View Presentation)

Chambers, Janice J.

• Developments in Connection Design Specifications and Approaches: State-of-the-Art Analysis of Frames with Reduced Beam Section Connections
  (View Abstract)

Chan, Jimmy H.

• Impact Tests for Constitutive Models Analysis and Computation: Single Degree of Freedom Characterization of Impact Load on Continuous Systems
  (View Abstract | View Presentation)

Chang, Chao-Shun

• Poster Session III: Research on the shrinkage deformation and crack development of high-strength high-performance concrete containing silica fume
  (View Abstract | View Presentation)

Charalambides, Jason E.

• Education of Structural Engineers - 2: Developing a computer assisted multi-disciplinary decision making platform
  (View Abstract | View Presentation)

Charlet, Arnaud Y.

• Validation and Verification of Hybrid Simulation for Seismic Structural Response: HYBRID SIMULATION OF THE GRAVITY LOAD COLLAPSE OF REINFORCED CONCRETE FRAMES
  (View Abstract)

Charney, Finley A.

• Are We Teaching the Wrong Stuff? : Structural Analysis: Are we teaching the Wrong Stuff?
  (View Abstract)
• The Use of Mathcad, Matlab, and other Applications and Technology in Teaching Advanced Structural Analysis: A Transformational Approaching to Teaching Matrix Structural Analysis
  (View Abstract)

Chassapis, Constantin

• Computational Aspects in Distance Education: IT-Enhanced Laboratory Experience within a Mechanical Engineering Undergraduate Curriculum
  (View Abstract | View Presentation)

Chen, Cheng

• NEES Projects: Real-time Hybrid Testing Using an Unconditionally Stable Explicit Integration Algorithm
  (View Abstract)

Chen, Chui Hsin

• New Developments in Concentrically Braced Frames for Seismic Design: Numerical modeling and performance assessment of concentrically braced steel frames
  (View Abstract)

Chen, David

• Tensioned Fabric Structures - Case Studies: Snow Induced Ponding of Toyota Pavilion Canopy, Montage Mountain, PA
  (View Abstract)

Chen, Helen

• Development of AISI Cold-Formed Steel Seismic Design Standards: Overview of the Standard for Seismic Design of Cold-Formed Steel Structural Systems–Special Bolted Moment Frames
  (View Abstract)

Chen, How Ji

• Poster Session III: A New Testing Method for Fatigue of Reinforced Concrete Beam
  (No Abstract | View Presentation)

Chen, How-Ji

• Poster Session III: The accelerated method for estimating corrosion of reinforced concrete structure in seawater
  (View Abstract | View Presentation)

Chen, Jiun-Shyan

• Development and Validation of Advanced Modeling Methods for High-Rate Loadings: Semi-Lagrangian Galerkin Reproducing Kernel Formulation and Stability Analysis for Computational Penetration Mechanics
  (View Abstract)

Chen, Sheng-Jin

• Seismic Evaluation - Walls: Seismic Behavior of Low Yield Point Steel Plate Shear Walls
  (View Abstract)

Chen, Yue

• Poster Session I: Development of thick laminated wood plates using MPB wood
  (View Abstract)

Cheng, An Shun

• Poster Session III: Relation between Porosity and Compressive Strength of Slag Concrete
  (View Abstract | View Presentation)

Cheng, Xiaohua H.

• Fatigue Enhancement of Steel Structures: Fatigue Resistance Enhancement and Residual Stress Modification of Welded Steel Structures by Various Post-Weld Treatments
  (View Abstract)

Chi, Hoseok

• NEES Projects: DESIGN AND ANALYTICAL VALIDATION OF POST-TENSIONED COLUMN BASES
  (View Abstract)

Chiarito, Vincent P.

• Remote Sensing for Condition Assessment and Damage Identification: Assessing Damage of a Reinforced Concrete Structural Element using System Identification
  (View Abstract)

Chidambaram, Sankaralingam

• Cable Stayed Bridge Design: Wadi Abdoun Bridge - Jordan
  (View Abstract)

Christiansen, Axel

• IABSE: Recent Developments in International Bridge and Structural Engineering Part 3: The Great Danish Bridge Connections: State Of The Art Of Bridge Engineering In Denmark
  (View Abstract)

Christovasilis, Ioannis P.

• ATC-63 - Quantification of Building System Performance and Response Parameters: Example Evaluation of the ATC-63 Methodology for Wood Light-Frame System
  (View Abstract)

Christovasilis,, Ioannis P.

• Post Earthquake Investigation of Wood Buildings: Experimental Seismic Investigation of a Full-Scale Woodframe Building
  (View Abstract)

Chudgar, Samir

• Existing Buildings - Codes / Standards / Evaluation and Rehabilitation: Pioneer Square Areaways
  (View Abstract | View Presentation)

Cimellaro, Gian Paolo

• Poster Session I: ALGORITHM FOR OPTIMAL DESIGN OF ADJACENT BUILDINGS CONNECTED BY FLUID VISCOUS DEVICES
  (View Abstract | View Presentation)

Citipitioglu, Ahmet

• Advances in Seismic Isolation Design Practice in the U.S. and Japan: An Innovative Application of Base Isolation Technology
  (View Abstract)

Clark, Kelly

• New Developments in Concentrically Braced Frames for Seismic Design: Test of a full scale concentrically braced frame with multi-story X-bracing
  (View Abstract)

Cleland, Ned

• Developments in Connection Design Specifications and Approaches: Steel Connection Design for Structural Integrity
  (View Abstract)

Clouston, Peggi

• Education of Structural Engineers - 1: Pedagogic Strategies for Wood Engineering in an Interdisciplinary Setting
  (View Abstract)

Cocca, John E.

• Extreme Loads: Mathmatical Simulation of 50- Year Snow Drift Loads
  (View Abstract)

Cochran, Leighton

• Introduction to the new ASCE Technical Council on Wind Engineering: Background to the Structural Wind Engineering Committee
  (View Abstract | View Presentation)
• Introduction to the new ASCE Technical Council on Wind Engineering: Creation of the ASCE TCWE
  (View Abstract)

Coco, Russell J.

• Wind or Water? (Separating Wind and Storm-Surge Damage in Hurricanes): Effective Forensic Engineering Investigations of Hurricane
  (View Abstract)

Collings, David

• CASE Risk Management Spring Convocation Plenary Session 1: Building Information Modeling (BIM): The Promise and The Reality for A/E/C Firms
  (View Abstract)

Collins, Michael P.

• Recent Advances in Shear Design for Reinforced Concrete: One-Way Shear in Wide Concrete Beams with Narrow Supports
  (View Abstract)

Connor, Robert J.

• In-Service Monitoring of Bridges and High-Mast Light Towers: Field and Laboratory Studies on high-mast Lighting Towers in Iowa
  (View Abstract)

Consolazio, Gary R.

• The Use of Mathcad, Matlab, and other Applications and Technology in Teaching Advanced Structural Analysis: Leveraging the integrated programming and visualization features of Mathcad in teaching advanced structural analysis
  (View Abstract)

Constantinescu, George

• Design of Structures for Wind Using Computational Methods: A Numerical Study of Wind Loads on Large Highway Sign Structures
  (View Abstract)

Conte, Joel P.

• Structural Identification of Constructed Systems for Evaluation of Performance: A Review of Structural Identification for Bridge Structures
  (View Abstract)

Cortes, Gustavo

• Poster Session II: ANALYTICAL INVESTIGATION OF STEEL SLIT PANELS FOR LATERAL RESISTANCE OF STEEL FRAME BUILDINGS
  (View Abstract | View Presentation)

Coulbourne, William L.

• Wind Engineering: Wind Speed Analysis of Greensburg, KS Tornado
  (View Abstract | View Presentation)

Coult, Graham

• Glass Structures: An All Glass Cube in New York City
  (View Abstract)

Cramer, Steven M.

• Education of Structural Engineers - 1: The Changing Nature of Students and Universities: Opportunities
  (View Abstract)

Crawford, John

• Innovative Methods for Blast and Progressive Collapse Mitigation: RETROFIT OF MASONRY WALLS TO ENHANCE THEIR BLAST RESISTANCE
  (View Abstract)

Crépeau, Louis

• International Advances in Steel Plate Shear Walls 2: Design Codes and Applications: SPSW Application for the Rehabilitation of Seismically Deficient Reinforced Concrete Building
  (View Abstract | View Presentation)

Cross, Brad

• In-Service Monitoring of Bridges and High-Mast Light Towers: Experienced gained and lessons learned from an extensive bridge monitoring research project
  (View Abstract)

Crowder, Brian R.

• Progressive Collapse: Unified Progressive Collapse Design Requirements for DOD and GSA
  (View Abstract)

Cusatis, Gianluca

• Development and Validation of Advanced Modeling Methods for High-Rate Loadings: Dynamic Pull-out Test Simulations through the Lattice Discrete Particle Model (LDPM)
  (View Abstract | View Presentation)
• Impact Tests for Constitutive Models Analysis and Computation: Lattice Discrete Particle Model (LDPM) for Fracture Dynamics and Rate Effect in Concrete.
  (View Abstract | View Presentation)

Cussen, R.

• Global Building System Behavior Under Abnormal Loading Events: Inelastic Dynamic Finite Element Design of Glazed Facade Systems for Blast Loading
  (View Abstract | View Presentation)

D

Dalrymple, Gerald A.

• Masonry Design and Evaluation: Forensic Evaluation Techniques for Masonry Construction
  (View Abstract | View Presentation)

Danielson, Kent

• Development and Validation of Advanced Modeling Methods for High-Rate Loadings: Semi-Lagrangian Galerkin Reproducing Kernel Formulation and Stability Analysis for Computational Penetration Mechanics
  (View Abstract)

Dao, Thang N.

• The Next Step for ASCE 16: Performance-Based Design of Wood Structures: Performance-Based Design of Wood Frame Structures for Wind
  (View Abstract)

Dastfan, Mehdi

• International Advances in Steel Plate Shear Walls 1: Research: Behavior of Steel Plate Shear Walls with Composite Columns
  (View Abstract)

Datteri, Ryan

• Computational Aspects in Distance Education: Optimizing Resources in Undergraduate Research
  (View Abstract)

Davaran, Ali

• Poster Session I: An Inelastic Model for Low Cycle Fatigue Prediction in Steel Braces
  (View Abstract | View Presentation)
• Poster Session I: Analytical investigation of mixed BRBF and SCBF braced steel frames
  (View Abstract | View Presentation)
• Poster Session I: Effect of Mid-Connection Detail of Cross Bracings on Elastic-Plastic Behavior of Braced System
  (View Abstract | View Presentation)

Davidson, Rachel A.

• Network Infrastructure Performance for Extreme Winds: Estimating Electric Power Outages due to Hurricane and Ice Storms Using Spatial Generalized Linear Mixed Models
  (View Abstract)

Dawson, H.

• Global Building System Behavior Under Abnormal Loading Events: Inelastic Dynamic Finite Element Design of Bollard Systems to Impact Loading
  (View Abstract)

De Palma, Paul

• Computational Aspects in Distance Education: Optimizing Resources in Undergraduate Research
  (View Abstract)

Degracia, Steve

• Computational Aspects in Distance Education: Integration of New Teaching Methodologies into a Laboratory Based Course
  (View Abstract | View Presentation)

Deierlein, Gregory G.

• ATC-63 - Quantification of Building System Performance and Response Parameters: ATC 63 Methodology for Evaluating Seismic Collapse Safety of Archetype Buildings
  (View Abstract)
• Collapse Simulation of Structural Systems Subjected to Seismic Excitation in Engineering Practice: Comparing Seismic Collapse Safety of Modern and Existing Reinforced Concrete Frame Structures in California
  (View Abstract)
• ATC-63 - Quantification of Building System Performance and Response Parameters: Example Evaluation of the ATC-63 Methodology for Reinforced Concrete Special Moment Frame Buildings
  (View Abstract)
• Collapse Simulation of Structural Systems Subjected to Seismic Excitation in Engineering Practice: Study of Building Collapse for Performance-Based Design Validation
  (View Abstract)

Delisle, Rodney

• Utilization of Non Destructive Testing (NDT) Methods in Structural Health Monitoring (SHM): Deterioration Rates for Bridge Components in New York
  (View Abstract)

Deng, Xiaoyan

• International Advances in Steel Plate Shear Walls 1: Research: Behavior of Steel Plate Shear Walls with Composite Columns
  (View Abstract)

Denzer, Anthony S.

• Education of Structural Engineers - 2: How a Collaborative Architecture Influences Structural Engineering Education
  (View Abstract | View Presentation)

DeRoeck, Guido

• Structural Identification of Constructed Systems for Evaluation of Performance: A Review of Structural Identification for Bridge Structures
  (View Abstract)

DesRoches, Reginald

• Seismic Design of Bridges: Which ground motion intensity measure is most appropriate for conditioning demand models for bridge portfolios?
  (View Abstract)
• Performance-based Evaluation of Passive Control Systems: Seismic Performance Assessment of a Passive Control Technology for Bridges using Shape Memory Alloys
  (View Abstract)
• Advances in Structural Control: Analytical Study of SDOF Systems with Superelastic Shape Memory Alloy Properties
  (View Abstract | View Presentation)
• Bridge Design and Rehabilitation: Comparative Assessment with Detailed Models of Sliding versus Elastomeric Seismic Isolation in Typical Multi-Span Bridges
  (View Abstract)

Diamantidis, Dimitris

• Structural Reliability in Design Practice: Current safety acceptance criteria in codes and standards - a critical review
  (View Abstract | View Presentation)

Dickie, Jocelyn E.

• Connections and Detailing - 1: Horizontal Joint Reinforcement Requirements for Brick Veneer in Seismic Design Categories E and F
  (View Abstract)
• Building Façade: Height Restrictions for Brick Veneer with Wood Frame Backing
  (View Abstract)

Dickson, Michael G.

• IStructE: International Structural Engineering I: Timber engineered for C21 Architecture
  (View Abstract)

Dilger, W. H.

• CSCE: The Confederation Bridge - The First 10 Years of Service: Thermal Response of the Confederation Bridge: Extreme Thermal Loading and Expansion Joint Movement
  (View Abstract)

DiMaggio, Peter

• Innovative Methods for Blast and Progressive Collapse Mitigation: Blast Resistant Design using Advanced, State-of-the Art Materials
  (View Abstract | View Presentation)

Ding, Jiemin

• Poster Session III: Analysis and Design of the Roof Structure of Table Tennis Gymnasium for the 2008 Olympic Games
  (View Abstract)

Diniz, Sofia M.

• Structural Reliability in Design Practice: Structural Reliability: Rational Tools for Design Code Development
  (View Abstract)

Dodge, Darius P.

• Seismic Evaluation - Walls: Experimental and Analytical Investigation of Seismic Performance of Sprayable Polyurethane Foam Infill Timber Shear Walls
  (View Abstract | View Presentation)

Doepker, Blake

• Application of Finite Element Analysis for Seismic Design and Evaluation of Concrete Buildings: Evaluation of Practical Methods for Analysis of Reinforced Concrete Walls
  (View Abstract)

Doerrer, Ryan

• Poster Session II: LIVE LOAD DISTRIBUTION FOR CAST IN PLACE BOX GIRDER BRIDGES
  (View Abstract)

Doh, Jeung-Hwan

• Poster Session II: Behavior Characteristic of Hypar Shaped Space Truss with Removed Members
  (View Abstract)

Domaingo, Andreas

• Cable Stayed Bridge Design: SOFTWARE TOOL FOR WIND DESIGN OF CABLE STAYED BRIDGES
  (View Abstract)

Dong, Yuli

• Fire Behavior and Design of Steel and Composite Structures: Experimental Study on the Behavior of Composite Steel Frame Subjected to Fire
  (View Abstract)

Driver, Robert G.

• International Advances in Steel Plate Shear Walls 2: Design Codes and Applications: Steel Plate Shear Walls in the Upcoming 2010 AISC Seismic Provisions and 2009 Canadian Standard S16
  (View Abstract)
• International Advances in Steel Plate Shear Walls 1: Research: Behavior of Steel Plate Shear Walls with Composite Columns
  (View Abstract)
• International Advances in Steel Plate Shear Walls 1: Research: Research Needs and Future Directions for Steel Plate Shear Walls
  (View Abstract)

DuBois, Mark

• Glass Structures: Glass Bearing Walls
  (View Abstract)

Dunkman, David A.

• Building Façade: Dormant Curtain Wall Anchors: Relative Stiffness & Underdesign
  (View Abstract | View Presentation)

Dusicka, Peter

• New Developments in Concentrically Braced Frames for Seismic Design: Concept of Buckling Restraint of Steel Braces with Fiber Reinforced Polymers
  (View Abstract)

Dutta, Anindya

• Advances in Seismic Isolation Design Practice in the U.S. and Japan: An Innovative Application of Base Isolation Technology
  (View Abstract)

Dwaikat, Monther

• Design for Structural Fire Safety: Fire Performance of Reinforced Concrete Beams under Design Fire Exposures
  (View Abstract)

Dyke, Shirley J.

• General Seismic - Analysis: A Total Strain Based Hysteretic Material Model for 2D Planar Reinforced Concrete Structures
  (View Abstract | View Presentation)
• Poster Session III: A Structural Damage Detection Method Based On Subset Selection and Evolutionary Computation
  (View Abstract | View Presentation)

E

Eagan, Patrick L.

• 2006 SJI Standard Specification for the Design of Composite Steel Joists, Cj-Series - A New Specification and Catalog for the Design Professional: 2006 SJI Standard Specification for the Design of Composite Steel Joists, CJ-Series -- A New Specification and Catalog for the Design Professional
  (View Abstract)

Easazadeh Far, Narges

• Poster Session I: An Inelastic Model for Low Cycle Fatigue Prediction in Steel Braces
  (View Abstract | View Presentation)

Ebrahimi, Ali

• Poster Session I: The Effect of Soil-Structure Interaction in 14-story Building Retrofitting Project of National Housing and Land Organization
  (View Abstract)

Eitel Biegalski, Amy

• In-Service Monitoring of Bridges and High-Mast Light Towers: Problem Diagnosis and Retrofit of A Steel Truss Bridge
  (View Abstract)

El Damatty, Ashraf

• Network Infrastructure Performance for Extreme Winds: Modeling and prediction of failure of transmission lines due to high intensity winds
  (View Abstract)

El-Badry, Mamdouh

• CSCE: Seismic Performance and Retrofit of buildings - a Canadian Perspective: Steel Reinforced Polymers Enhance Strength and Ductility of Beam-Column Joints under Seismic Loads
  (View Abstract)
• CSCE: The Confederation Bridge - The First 10 Years of Service: Long-Term Deformations and Stresses
  (View Abstract)

El-Chabib, Hassan H.

• Connections and Detailing - 1: Shear Capacity of FRP Stirrups in FRP-Reinforced Concrete Beams Based on Genetic Algorithms Approach
  (View Abstract)

El-Reedy, Mohamed A.

• Industrial Facilities - Silos Tanks & Dams: Reliability Analysis of LPG Sphere tanks Legs
  (View Abstract)

El-Tawil, Sherif

• Progressive Collapse: Assessment of Progressive Collapse Residual Capacity using Pushdown Analysis
  (View Abstract)

Elbadry, Mamdouh

• CSCE: Seismic Performance and Retrofit of buildings - a Canadian Perspective: Experimental Investigation of the Cyclic Behavior of Concrete Frame Joints Reinforced with Double-Headed Studs
  (View Abstract)

Elliott, Douglas N.

• CASE Convocation Breakout Sessions: Closed Claims – “Lessons Learned”
  (View Abstract)

ELSAFTY, ADEL

• Bridge Design and Rehabilitation: Extending the Service Life of Bridges Using CFRP Laminates and Continuous Decks
  (View Abstract | View Presentation)
• Forensic Structural Engineering: Forensic Investigation of a Bridge Construction Scaffolding Collapse
  (View Abstract | View Presentation)

Elwood, Kenneth J.

• Validation and Verification of Hybrid Simulation for Seismic Structural Response: HYBRID SIMULATION OF THE GRAVITY LOAD COLLAPSE OF REINFORCED CONCRETE FRAMES
  (View Abstract)

Erbay, Omer O.

• Poster Session I: Crack Propagation Evaluation of Polymer Composite FRP Panels Subjected to Static and Cyclic Loading
  (View Abstract)

Erdogan, Ersoz

• Poster Session III: ELASTOPLASTIC ANALYSIS AND DUCTILITY EVALUATION OF STEEL TUBULAR COLUMNS SUBJECTED TO CYCLIC LOADING
  (View Abstract | View Presentation)

Ericson, Nils V. (Val)

• CASE Convocation Breakout Sessions: Closed Claims – “Lessons Learned”
  (View Abstract)

Eröz, Murat

• Bridge Design and Rehabilitation: Comparative Assessment with Detailed Models of Sliding versus Elastomeric Seismic Isolation in Typical Multi-Span Bridges
  (View Abstract)

Esche, Sven

• Computational Aspects in Distance Education: IT-Enhanced Laboratory Experience within a Mechanical Engineering Undergraduate Curriculum
  (View Abstract | View Presentation)

Eschenasy, Dan

• Innovative Structural Systems: Design and Construction for Dense Urban Areas –Structural Engineering Challenges?
  (View Abstract)

Ettouney, Mohammed

• Utilization of Non Destructive Testing (NDT) Methods in Structural Health Monitoring (SHM): Suitability of Non Destructive Testing (NDT) Methods for Structural Health Monitoring (SHM) of Civil Infrastructures
  (View Abstract)
• Remote Sensing for Condition Assessment and Damage Identification: Review of Remote Sensing for Condition Assessment and Damage Identification after Extreme Loading Conditions
  (View Abstract)

F

Fahnestock, Larry A.

• General Seismic - Analysis: Ductility Capacity Models for Buckling-Restrained Braces using a Bayesian Methodology
  (View Abstract | View Presentation)

Falken, Luke

• Poster Session III: ELASTOPLASTIC ANALYSIS AND DUCTILITY EVALUATION OF STEEL TUBULAR COLUMNS SUBJECTED TO CYCLIC LOADING
  (View Abstract | View Presentation)

Farooqi, Najibullah

• Remote Sensing for Condition Assessment and Damage Identification: Remote Monitoring on Internal Condition of Buried Pipe Infrastructures
  (View Abstract)

Farrar, Charles

• Structural Identification of Constructed Systems for Evaluation of Performance: A Review of Structural Identification for Bridge Structures
  (View Abstract)

FEGHALY, Roy

• Forensic Structural Engineering: Analyses of the reasons of Roissy Terminal 2E collapse in France using deterministic and reliability assessments
  (View Abstract | View Presentation)

Feldgun, Vladimir R.

• Development and Validation of Advanced Modeling Methods for High-Rate Loadings: Study of Soil-Structure Interaction Response to Nearby Explosions by Coupled 2D Godunov – Variational Difference Approach
  (View Abstract | View Presentation)

Fennell, Jason P.

• Lessons from Recent Windstorms: A Rational Benefit/Cost Approach for Evaluating Structural Mitigation for Wind Damage: Learning
  (View Abstract)

Fenves, Gregory L.

• Advances in Software Development for Structural Engineering Applications: Nonlinear Structural Analysis Using Software Design Patterns
  (View Abstract)

Fernández, Alberto

• Large Structures: An enclosure for the European Extremely Large Telescope
  (View Abstract | View Presentation)

Filiatrault, Andre

• ATC-63 - Quantification of Building System Performance and Response Parameters: Example Evaluation of the ATC-63 Methodology for Wood Light-Frame System
  (View Abstract)
• Post Earthquake Investigation of Wood Buildings: Experimental Seismic Investigation of a Full-Scale Woodframe Building
  (View Abstract)

Finlayson, Bruce A.

• A&C Plenary Session: Simulations Involving Multiple Physics using Comsol Multiphysics
  (View Abstract | View Presentation)

Finn, William D.

• CSCE: Seismic Performance and Retrofit of buildings - a Canadian Perspective: Performance-based Retrofit Guidelines for School Buildings in British Columbia, Canada
  (View Abstract | View Presentation)

Firth, Ian

• IABSE: Recent Developments in International Bridge and Structural Engineering Part 1: The Good, The Bad And The Ugly - Lessons From Bridge Design Competitions
  (View Abstract)

Fisher, John W.

• Fatigue Enhancement of Steel Structures: Assessment of the Fatigue Threshold of Welded Details subjected to Post-Weld Ultrasonic Impact Treatment
  (View Abstract)
• Fatigue Enhancement of Steel Structures: Fatigue Resistance Enhancement and Residual Stress Modification of Welded Steel Structures by Various Post-Weld Treatments
  (View Abstract)

Fitzgerald, Sean

• Computational Aspects in Distance Education: Optimizing Resources in Undergraduate Research
  (View Abstract)

Foley, Christopher M.

• System Performance Optimization - Minimizing Annual Loss, Minimizing Life-Cycle Costs and Maximizing Performance Reliability: Automated Risk-Based Design Method for Optimal Structural and Non-Structural System Performance
  (View Abstract | View Presentation)

Foo, Simon

• CSCE: Seismic Performance and Retrofit of buildings - a Canadian Perspective: Seismic Performance Of Gravity Load Designed Reinforced Concrete Frames With Unreinforced Masonry Infill Walls
  (View Abstract | View Presentation)

Fortney, Patrick

• High Rise Buildings - Session 1: DESIGN COMPRESSION FORCES FOR COUPLED WALL STRUCTURES
  (View Abstract)

Fortney, Patrick J.

• Poster Session I: Preliminary Findings in the Development of Quantitative Tools for Assessing in situ Strength of Prestressed Concrete Structures Subjected to Fire
  (View Abstract | View Presentation)

Frangopol, Dan M.

• Structural Robustness and Redundancy: On Structural Robustness, Redundancy and Static Indeterminacy
  (View Abstract)
• System Performance Optimization - Minimizing Annual Loss, Minimizing Life-Cycle Costs and Maximizing Performance Reliability: Structural Performance Optimization with Conflicting Objectives under Uncertainty
  (View Abstract)

Freeman, Sigmund A.

• Existing Buildings - Codes / Standards / Evaluation and Rehabilitation: ASCE-31 and ASCE-41: What Good Are They?
  (View Abstract)

Friedland, Carol J.

• Remote Sensing for Condition Assessment and Damage Identification: Remote Sensing and Field Reconnaissance for Rapid Damage Detection in Hurricane Katrina
  (View Abstract)

Fritz, William P.

• Damping in Buildings: Measurements, Uncertainty, and Application: Models for the median and variability of building damping based on basic building properties
  (View Abstract)

Fu, Paul

• Poster Session III: Design of an architectural roof lantern at top of plaza 66 tower 2
  (View Abstract)

Fujino, Y

• Structural Identification of Constructed Systems for Evaluation of Performance: Structural Identification of Constructed Systems: Experimental Considerations
  (View Abstract)

G

Galsworthy, Jon

• Network Infrastructure Performance for Extreme Winds: Modeling and prediction of failure of transmission lines due to high intensity winds
  (View Abstract)

Ganzerli, Luigi

• Poster Session I: Preservation of Historical Walser Houses in Alagna Valsesia, Italy
  (View Abstract)

Ganzerli, Sara

• Computational Aspects in Distance Education: Integration of New Teaching Methodologies into a Laboratory Based Course
  (View Abstract | View Presentation)
• Computational Aspects in Distance Education: Optimizing Resources in Undergraduate Research
  (View Abstract)
• Poster Session I: Preservation of Historical Walser Houses in Alagna Valsesia, Italy
  (View Abstract)

Garay, Juan de Dios

• Advances in Material Properties and Design: Behavior of Concrete Deep Beams with High Strength Reinforcement
  (View Abstract)

Garber, Jason

• High Rise Buildings - Session 2: Wind Tunnel Techniques for Towers of Unusual Geometry
  (View Abstract)

Gardoni, Paolo

• General Seismic - Analysis: SEISMIC FRAGILITY ANALYSIS OF TYPICAL LOW- TO MID-RISE REINFORCED CONCRETE STRUCTURES
  (View Abstract | View Presentation)

Garlock, Maria

• NEES Projects: DESIGN AND ANALYTICAL VALIDATION OF POST-TENSIONED COLUMN BASES
  (View Abstract)

Gasulla, Ernesto M.

• Blast Resistant Buildings in Petrochemcial Facilities: Blast Hardened Retrofit Details for Petrochemical Buildings
  (View Abstract | View Presentation)

Gebhart, Kenneth

• Progressive Collapse: Progressive Collapse Analysis of a Steel Building with Pre-Northridge Moment Connections
  (View Abstract | View Presentation)

Ghaboussi, Jamshid

• NEES Projects: Predictor-Corrector Algorithm for Multi-site Hybrid Simulation
  (View Abstract | View Presentation)

Ghali, A.

• CSCE: The Confederation Bridge - The First 10 Years of Service: Long-Term Deformations and Stresses
  (View Abstract)

GHOLHAKI, Majid

• Steel Shear Wall Systems-Recent Experimental and Analytical Studies: Tests of Two Three-Story Ductile Steel Plate Shear Walls
  (View Abstract)

Ghosh, Shubharoop

• Remote Sensing for Condition Assessment and Damage Identification: Remote Sensing and Field Reconnaissance for Rapid Damage Detection in Hurricane Katrina
  (View Abstract)

Gibb, William

• Connections and Detailing - 2: Inelastic Cyclic Testing of the Kaiser Bolted Bracket Moment Connection
  (View Abstract)

Giezen, Cecile

• Assessment and Evaluation of Building Components: CABLE-STAYED FACADE STRUCTURE WITH WELDED BOROSILICATE GLASS TUBES
  (View Abstract)

Gilani, Amir S.

• Prequalified Moment Connections for Seismic Design of Steel Structures: Design of a new steel moment frame building using ASCE 7 provisions
  (View Abstract | View Presentation)
• Seismic Evaluation - Walls: Earthquake Simulator Testing and Evaluation of Suspended Ceilings: Standard and Alternate Perimeter Installations
  (View Abstract | View Presentation)

Gilbert, Robert B.

• What Makes a Wood Design a Good Design?: A Proposed Design Method for Wood Piles used in Residential Construction
  (View Abstract)

Gindy, Mayrai

• Structural Reliability in Design Practice: Development of a Bridge Live Load Model for Serviceability Limit States
  (View Abstract | View Presentation)

Giuliani, Luisa B.

• Poster Session II: NONLINEAR ANALYSIS FOR PROGRESSIVE COLLAPSE INVESTIGATIONS ON R.C. FRAMED STRUCTURES
  (View Abstract | View Presentation)

Giuliani, Luisa

• Structural Robustness and Redundancy: NONLINEAR DYNAMIC ANALYSIS FOR THE STRUCTURAL ROBUSTNESS ASSESSMENT OF A COMPLEX STRUCTURAL SYSTEM
  (View Abstract | View Presentation)

Gizejowski, Marian A.

• Seismic Design - Structural System: Practical Equivalent Stiffness Approach for Direct Design of Steel Frames
  (View Abstract)

Glasgow, Bob

• Seismic Evaluation - Walls: Earthquake Simulator Testing and Evaluation of Suspended Ceilings: Standard and Alternate Perimeter Installations
  (View Abstract | View Presentation)

Godinho, Jessica

• Extreme Loads: Air-blast failure criteria for columns using finite element methods
  (View Abstract)

Goel, Rakesh

• Seismic Design - Structural System: Evaluation of ASCE-41 Nonlinear Static Procedure Using Recorded Motions of Reinforced-Concrete Buildings
  (View Abstract)
• Risk, Reliability, and Safety in the Offshore Environment: Simplified Procedure for Seismic Analysis of Reinforced-Concrete Piles in Marine Oil Terminals
  (View Abstract)

Goodson, Mary W.

• Sustainability for Structural Engineers: Strategies, Paradigms, and Measurement: Concrete Construction with a View Towards Sustainability
  (View Abstract)

Gossen, Paul A.

• Tensioned Fabric Structures - Case Studies: Snow Induced Ponding of Toyota Pavilion Canopy, Montage Mountain, PA
  (View Abstract)

Gould, Nathan C.

• Progressive Collapse: PROGRESSIVE COLLAPSE ANALYSIS AND RETROFIT DESIGN USING THE UNIFIED FACILITIES CRITERIA
  (View Abstract)
• Education of Structural Engineers - 2: PREPARING GRADUATES TO BE EFFECTIVE CONTRIBUTORS IN A STRUCTURAL ENGINEERING OFFICE
  (View Abstract)

Gould, Phillip L.

• Education of Structural Engineers - 2: PREPARING GRADUATES TO BE EFFECTIVE CONTRIBUTORS IN A STRUCTURAL ENGINEERING OFFICE
  (View Abstract)

Green, Perry S.

• 2006 SJI Standard Specification for the Design of Composite Steel Joists, Cj-Series - A New Specification and Catalog for the Design Professional: An Introduction to Composite Steel Joists – Research and Behavior
  (View Abstract | View Presentation)
• 2006 SJI Standard Specification for the Design of Composite Steel Joists, Cj-Series - A New Specification and Catalog for the Design Professional: SJI First Edition CJ-Series Standard Specifications for Composite Steel Joists, Weight Tables, Bridging Tables and Code of Standard Practice
  (View Abstract | View Presentation)
• Practical Solutions for Stability and Bracing of Steel Frames: Erection Bridging of Open-Web Steel Joists and Joist Girders
  (View Abstract | View Presentation)

Green, Travis P.

• Bridge Case Studies: Structural Condition Assessment of the Herbert C. Bonner Bridge in Dare County, North Carolina
  (View Abstract | View Presentation)

Griezic, Andrew

• Cable Stayed Bridge Design: The Canada Line Extradosed Transit Bridge
  (View Abstract)

Griffith, Morgan

• Wind Engineering: Wind-Driven Rain as a Design Parameter
  (View Abstract)
• Post Earthquake Investigation of Wood Buildings: Woodframe Seismic Response Analysis – Benchmarking with Buildings Damaged During the Northridge Earthquake
  (View Abstract)

Grimmelsman, Kirk A.

• Structural Identification of Constructed Systems for Evaluation of Performance: A Review of Structural Identification for Bridge Structures
  (View Abstract)

Groenier, James "Scott" S.

• Timber Bridge Design Issues: Designing Timber Bridge Superstructures: A Comparison of US and Canadian Codes
  (View Abstract)

Gromala, David S.

• Sustainability for Structural Engineers: Material Industry Perspectives: Sustainability Attributes of Bio-Based Structural Building Products
  (View Abstract | View Presentation)

Grossenbacher, Steve V.

• Sustainability for Structural Engineers: Strategies, Paradigms, and Measurement: Structural Testing of High Thermal Mass Walls Used in Sustainable Designs
  (View Abstract)

Guikema, Seth D.

• Network Infrastructure Performance for Extreme Winds: Estimating Power Outages During Hurricanes Using Semi-Parametric Statistical Methods
  (View Abstract)

Gupta, Akshay

• Large Structures: PERFORMANCE-BASED SEISMIC DESIGN OF AN INDUSTRIAL STORAGE RACK SYSTEM
  (View Abstract)
• Post Earthquake Investigation of Wood Buildings: Woodframe Seismic Response Analysis – Benchmarking with Buildings Damaged During the Northridge Earthquake
  (View Abstract)

Gupta, Rakesh

• The Next Step for ASCE 16: Performance-Based Design of Wood Structures: Performance Based Design of Wood Structures – Designing for Durability
  (View Abstract)

Gurav, Sanjay

• Poster Session II: Road Surface Roughness Generation by Power Spectral Density in Bridge Design
  (View Abstract)

Gurbuz, Orhan

• Application of Finite Element Analysis for Design of Concrete Structures: Dynamic Nonlinear Finite element analysis of Blast Resistant concrete buildings in Petrochemical Facilities
  (View Abstract | View Presentation)

Gurley, Kurt

• Lessons from Recent Windstorms: Impact of the 2004 Hurricane Season on the Florida Public Hurricane Loss Model
  (View Abstract | View Presentation)

Gustafson, Kurt

• Developments in Connection Design Specifications and Approaches: Steel Connection Design for Structural Integrity
  (View Abstract)

H

Haberland, Marco

• Structural Robustness and Redundancy: Measures of Structural Robustness -- Requirements and Applications
  (View Abstract | View Presentation)

Hagh, Abdol

• Bridge Case Studies: Demolition of the Grace Memorial and Silas N. Pearman Bridges over Cooper River, South Carolina, USA – A Case Study
  (View Abstract)

Hall, Bruce

• Progressive Collapse: Unified Progressive Collapse Design Requirements for DOD